View C080VW02-V0_7249827.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

version 3.1 total pages 19 date 2009/03/18 product specification 8 color tft-lcd module ( ) draft specification ( ) preliminary specification ( ) final specification model name: c080vw 02 v0 part no : 97.08c02.001 no te : the c o nt e nt of th is spec if ica t io n is s u bjec t to cha n ge w i th o ut pr i or i nform ? 2 00 8 au o ptr o nics al l r i gh ts res er v e d , d o n ot c op y. www.datasheet.co.kr datasheet pdf - http://www..net/
record of revision version revise date p a g e content 0.0 2007/08/01 0 first draft. 1.0 2008/03/03 4,5,8 modified led driving current 2.0 2008/08/25 3.4.5 updated pin assignment description: modify pin6 & 42 description, and add note1~3 description 7 update timing conditions for dclk frequency, dclk cycle ti me, dclk pulse width, stv setup time, stv hold time, ckv pulse width, output stable time 15 update fig2. operation mode diagram 18 update fig5. vertical timing (from up to down) diagra m 3.0 2008/11/27 4 modified oev pin (pin52) description: 6 revised led il absolute maximum rating: 150ma -> 200ma 7 update timing conditions for: stv(r/l) width, charging t ime 1&2, oev cover ckv time 1&2, time ckv rising to ld fallling, time oev rising to ld falling 17-19 update fig4.vertical timing, fig5. vertical shift clock ti ming, and fig6.oev timing diagram 3.1 2009/03/18 13, 14 revise the outline drawing of led cable www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 1 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. contents: a. physical specifications ................................................... ..................................... 2 b. electrical specifications ................................................... .................................... 3 1. pin assignment .................................. ................................................... ..................... 3 2. absolute maximum ratings......................... ................................................... ............. 6 3. typical operating conditions ...................... ................................................... ............ 6 4. current consumption conditions.................... ................................................... .......... 7 5. backlight driving conditions....................... ................................................... .............. 7 6. timing conditions ................................ ................................................... .................... 7 ac electrical characteristics ............................ ................................................... ...... 7 7. power on/off sequence........................... ................................................... ................8 c. optical specification ................................................... ........................................ 9 d. reliability test items ................................................... ........................................ 11 e. packing form ................................................... ................................................... . 12 appendix: ................................................... ................................................... ....................... 13 appendix: fig.1-a outline dimension of tft-lcd module (front v iew) . . . . . . . . . . p13 fig.1-b outline dimension of tft-lcd module (rear vi ew) . . . . . . . . . . p14 fig.2 operation mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p15 fig.3 horizontal timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p16 fig.4 vertical timing (from up to down) p17 fig.5 vertical shift clock timing p18 fig.6 oev timing p19 recommended gamma voltage p20 www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 2 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. a. physical specifications no item specification remark 1 display resolution (dot) 800rgb(w)480(h) 2 active area (mm) 175.20(w)105.12(h) 3 screen size (inch) 8.0(diagonal) 4 pixel pitch (mm) 0.073(w)3x0.219(h) 5 color configuration r. g. b. stripe 6 overall dimension (mm) 186.5(w)117.22(h)5.3(d) n ote 1 7 weight (g) 180 +/- 10% 8 surface treatment ag with swv film 9 backlight unit led note 1: refer to fig.1 outline dimension drawing www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 3 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. b. electrical specifications 1. pin assignment a.) tft-lcd panel driving section pin no symbol i/o description remark 1 gnd p power ground 2 vcom i common voltage 3 dio1 i/o horizontal start pulse signal input or ou tput note 1 4 gnd p power ground 5 vcc(dv dd) p voltage for digital circuit 6 edgsl i select raising edge or raising/falling edge when edgsl = "0", latching source data onto the line latches at the rising edge. when edgsl = "1", latching source data onto the line latches at the rising edge and falling edge. 7 dclk i pixel clock 8 lr i right or left display control 9 r0 i red data 10 r1 i red data 11 r2 i red data 12 r3 i red data 13 r4 i red data 14 r5 i red data 15 g0 i green data 16 g1 i green data 17 g2 i green data 18 g3 i green data 19 g4 i green data 20 g5 i green data 21 avdd p analog voltage for source driver 22 v1 i gamma correction reference voltage 23 v2 i gamma correction reference voltage 24 v3 i gamma correction reference voltage 25 v4 i gamma correction reference voltage 26 v5 i gamma correction reference voltage 27 v6 i gamma correction reference voltage 28 v7 i gamma correction reference voltage 29 v8 i gamma correction reference voltage 30 v9 i gamma correction reference voltage 31 v10 i gamma correction reference voltage 32 v11 i gamma correction reference voltage 33 v12 i gamma correction reference voltage 34 v13 i gamma correction reference voltage 35 v14 i gamma correction reference voltage 36 avss p analog ground for source driver 37 b0 i blue data 38 b1 i blue data 39 b2 i blue data www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 4 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. 40 b3 i blue data 41 b4 i blue data 42 b5 i blue data note 1 43 ld i latch and switch data to output note 2 44 rev i control whether rgb data are inverted or not when rev = 1 these data will be inverted. ex. 00 3f, 07 38, and so on. 45 pol i polarity selection note 3 46 vcc(dv dd) p voltage for digital circuit 47 gnd p power ground 48 chnsl i select source channel output number (must set to high) 49 avdd p analog voltage for source driver 50 dio2 i/o horizontal start pulse signal input or o utput note 1 51 vcom i common voltage 52 oev i output enable, active low. the gate driver outputs are disable when oev = h. 53 ud i up or down display control 54 ckv i clk (vertical) 55 stvu i/o start pulse signal input/output (vertical) note 1 56 stvd i/o start pulse signal input/output (vertical) note 1 57 vgh p tft high voltage 58 vgl p tft low voltage 59 vcc(dv dd) p voltage for digital circuit 60 gnd p power ground www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 5 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. note 1: ud stvu stvd direction l input output u d h output input d u lr dio1 dio2 direction h input output l r l output input r l note 2: ld latches the polarity of outputs and switches the new data to outputs. 1. at the rising edge, latches the pol signal to control the polarity of the outputs. 2. the pin also controls the switch of the line reg isters that switches the new incoming data to outpu ts. note 3: pol pol value is latched at the rising edge of ld to control the polarity of the even or odd outputs. pol=1: even outputs range from v1 ~ v7, and odd out puts range from v8 ~ v14 pol=0: even outputs range from v8 ~ v14, and odd ou tputs range from v1 ~ v7 ud=h lr=l ud=l pin 1 pin 60 ( 1 ... ..480 ) lr =h ( 1 2 3. .. . 798 799 800 ) www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 6 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. b). backlight driving section no. symbol i/o description remark 1 hi i power supply for backlight unit (high voltage) -- 2 gnd - ground for backlight unit -- 2. absolute maximum ratings product specification items symbol min. typ. max. unit vcc -0.5 5 v avdd -0.5 12 v vgh -0.3 18 v vgl -15 0.3 v power voltage vgh-vgl 33 v vi -0.3 vcc+0.3 v vref(v1~v7) 0.4avdd avdd+0.3 v vref(v8~v14) -0.3 0.6avdd v input signal voltage vcom 4.16 v operating temperature topa -30 85 storage temperature tstg -40 85 vl -- v led il 200 ma note 1 : the led tj temperature should never exceed 125 ? c if the il is larger than 150ma note 2 : the lifetime(10,000 hours continuous use) i s base on il=150ma(typical) under +25 ? c room temperature. 3. typical operating conditions (gnd=avss=0v) product specification items symbol min. typ. max. unit vcc 3.0 3.3 3.6 v avdd 9.7 9.8 9.9 v vgh 14.0 15.0 16.0 v vcom 4.0 4.2 4.4 v power voltage vgl -11 -10 -9 v v1~v7 0.4avdd avdd-0.1 v input reference voltage v8~v14 0.1 0.6avdd v vih 0.8vcc vcc v input h/l level voltage vil 0 0.2vcc v www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 7 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. 4. current consumption conditions(gnd=avss=0v) parameter symbol condition min. typ. max. unit igh vgh=15v 100 150 ua igl vgl=-10v -100 -150 ua icc vcc=3.3v 3.5 5 ma current for driver idd avdd=9.8 v 20 30 ma 5. backlight driving conditions parameter symb ol min. typ. max. unit remark led current i l 150 ma single s eries led voltage v l 20 22 v single series led lifetime l l 10000 hrs 6. timing conditions ac electrical characteristics (vcc=3.3v, avdd=9 . 8 v , a v s s = g n d = 0 v , t a = 2 5 ) parameter symbol min. typ. max. unit dclk frequency (edgsl = 0) fclk 33 40 mhz dclk frequency (edgsl = 1) fclk 16.5 20 mhz dclk cycle time tcph 25 30 ns dclk pulse width tcw 30% 70% tcph data set-up time tsu 4 ns data hold time thd 2 ns propagation delay of dio2/1 tphl 6 10 15 ns time that the last data to ld tld 1 tcph pulse width of ld twld 2 tcph time that ld to dio1/2 tlds 5 tcph pol set-up time tpsu 6 ns pol hold time tphd 6 ns stv setup time t suv 400 ns stv hold time t hdv 400 ns ckv pulse width t ckv 500 ns output stable time tst 15 us stv(r/l) width (note.2) tstv - 1 - tpckv charging time1 (note.3) tch1 20 us charging time2 (note.3) tch2 20 us oev cover ckv time1 toev1 1 tcph oev cover ckv time2 toev2 1 tcph time ckv rising to ld falling tctl 2 us time oev rising to ld falling totl 2 us note 1: due to panel is a passive component and no lea kage current allowed for better performance, it may need extra circuit to make sure the tft lcd panel storage www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 8 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. capacitors shorter discharge time when system power off. cu stomers should study the discharge circuit according to system design. note.2: pulse width of stv(r/l) should be set 1 tpckv (t ime period of ckv). note.3: if oev is used, charging time must be followed to tch1 setting, at least 20 us. otherwise, if oev is unused, charging time must be followed to tch2 setting, at least 20 us. note.4: if oev is used, t otl (time from oev rising edge to ld falling edge) should b e set more than 2us to prevent panel from displaying wrong d ata. if oev is unused, t ctl (time from ckv rising edge to ld falling edge) should be set more than 2us to prevent panel from displaying wrong d ata. note.5: if oev is used, pulse of oev must cover the rising area of ckv. therefore, t oev1 and t oev2 must be more than 1 tcph. 7. power on/off sequence power on www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 9 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. power off c. optical specification (note 1, note 2) item symb ol condition min. typ. max. unit remark response time rise fall tr tf =0 - - 15 20 50 60 ms ms note 3 contrast ratio cr at optimized viewing angle 200 300 - note 4 viewing angle top botto m left right c r 1 0 30 50 50 50 40 60 60 60 - - - - deg. note 4 brightness y l i l =150ma, 2 5 400 - nit note 5 x =0 0.26 0.31 0.36 white chromaticity y =0 0.28 0.33 0.38 note 5 n o t e 1 : a m b i e n t t e m p e r a t u r e = 2 5 , a n d led current i = 150 marms. to be measured in the dark room. note 2 :to be measured on the center area of panel wit h a viewing cone of 1by topcon luminance meter bm-7, after 10 minutes operation. www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 10 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. note 3. definition of response time: the output signals of photo detector are measured when t he input signals are changed from black to white(falling time) and from white to bla ck(rising time), respectively. the response time is defined as the time interval betwee n the 10% and 90% of amplitudes. refer to figure as below. note 4. definition of contrast ratio: contrast ratio is calculated with the following formula. contrast ratio (cr)= note 5. measured at the center area of the panel when all the input terminals of lcd panel are electrically opened. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% photo detector output when lcd is at white state photo detector output when lcd is at black state www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 11 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. d. reliability test items(note 2): no. test items conditions remark 1 high temperature storage t a = 9 5 240hrs 2 low temperature storage ta= - 4 0 240hrs 3 high temperature operation t p = 8 5 240hrs 4 low temperature operation ta= - 3 0 240hrs 5 high temperature and high humidity t p = 6 0 , 9 0 % r h 240hrs operation 6 heat shock - 3 0 ~ 8 5 / 2 0 0 c y c l e s 1 h r s / c y c l e non-operati on 7 electrostatic discharge 200v,200pf(0?), once for each terminal non-operati on frequency range : 8~33.3hz stoke : 1.3mm sweep : 2.9g, 33.3 ~ 400hz cycle : 15 minutes 2 hours for each direction of x,z 8 vibration 4 hours for y direction jis c7021, a-10 condition a 9 mechanical shock 100g, 6ms, x,y,z 3 times for each direction jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces jis z0202 note1: ta: ambient temperature. note2: tp: panel surface temperature note3: in the standard conditions, there is not display function ng issue occurred. all the cosmetic specification is judged before the reliability str ess. www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 12 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. e. packing form www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 13 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. appendix: fig 1-a outline dimension of tft-lcd module (front view) www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 14 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. fig 1-b outline dimension of tft-lcd module (rear view) www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 15 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. fig.2 operation mode www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 16 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. fig.3 horizontal timing www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 17 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. fig.4 vertical timing (from up to down) www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 18 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. fig.5 vertical shift clock timing www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 19 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. fig.6 oev timing www.datasheet.co.kr datasheet pdf - http://www..net/
version : 3.1 page : 20 /20 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission f rom au optoelectronics corp. recommended gamma voltage gamma 2.2 avdd 9.80 00h v1 9.7 01h v2 9.24 10h v3 7.76 20h v4 7.37 30h v5 7.01 3eh v6 6.30 3fh v7 5.99 3fh v8 4.46 3eh v9 4.08 30h v10 3.16 20h v11 2.78 10h v12 2.29 01h v13 0.65 00h v14 0.1 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of C080VW02-V0

	To Download C080VW02-V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .